PTFE

PTFE is generally referred to as a "non-stick coating" or "easy to clean material." This material is resistant to acids and bases and to various organic solvents and is almost insoluble in all solvents. At the same time, PTFE has the characteristics of high temperature resistance, and its friction coefficient is extremely low, so it can be used as a lubricant and it is also an ideal coating for easy cleaning of the inner layer of water pipes. Its production solves many problems in the fields of chemical industry, petroleum, and pharmaceuticals. PTFE seals, gaskets, gaskets. PTFE seals, gaskets and gaskets are made by molding with suspension polymerized PTFE resin. PTFE is chemically resistant compared to other plastics and has been widely used as a sealing material and a filling material. Its advantages are high temperature resistance, low temperature resistance, corrosion resistance, weather resistance, high lubrication, no adhesion, no toxicity, and electrical insulation.
  • Polyurethane Elastomer Roller

    Polyurethane elastomer roller had high bearing capacity. high strength and high hardness of high elastic modulus.
    Read More
  • Polyurethane Screen Mesh

    Coal mine ,metallic and non-metallic mineral sieve machine adopts various kinds of polyurethane screen. Using steel wire, steel sieve as enhance the skeleton,Usually these sieve at runtime to both their vibration, and shall inherit ore, coal, stone etc the impact of the...
    Read More
  • Polyurethane Rubber Rod And Liner

    Polyurethane rubber bars, lining boards and other miscellaneous parts are made of castable polyurethane elastomers, which have better comprehensive properties than general rubber and plastics.Its wear resistance and toughness is natural rubber 2-10 times, known as...
    Read More
  • Polyurethane Roller

    Polyurethane roller most use pouring process , outside of steel or iron roller coated a layer of polyurethane elastomer.Polyurethane roller has the high elasticity, excellent wear resistance and tear resistance , service life longer than steel roller and ordinary rubber.
    Read More
  • Polyurethane Lining Steel Pipe

    Polyurethane lining steel pipe has outstanding properties such as abrasion resistance and high elastic resistance,wearing life is over 10 times longer than that of steel pipe.It is widely used for electric power, metallurgy, mining, petrochemical, coal, building materials...
    Read More
  • Polyurethane Buffer

    Polyurethane buffer is an elevator and heavy-lifting large heavy mechanical limit position of the safety device., it can quickly will impact potential energy into elastic energy, has the strong hardness, good flexibility , quick recovery, oil resistance, corrosion resistance...
    Read More
  • PTFE Graphite Carbon Fiber Plates

    PTFE filled with graphite and carbon fiber can make its size concealed, thermal conductivity is improved, softening form is stable, compressive strength and hardness ratio are good wear-resistant materials.
    Read More
  • Sodium Treatment PTFE Board

    Because the surface of Teflon cannot be bonded, if you want to bond with other substances, you must chemically treat the PTFE on one or both sides and then make it into Sodium Treatment PTFE Board, which can be bonded with rubber, metal and other substances. In special use,...
    Read More
  • Filled Roll PTFE Teflon Board

    The PTFE Filled Roll Board is made of PTFE molded blank turning. It has excellent dielectric properties, no aging, best chemical resistance and wide range of strength. Pad seals and lubricants for use in a variety of media, as well as electrical insulation for use at various...
    Read More
  • Bridge Slider PTFE Plate

    Bridge Slider PTFE Plate is made from high strength ptfe suspension resin by methods of moulding,sintering and finalizing the design to various sizes.different fillings can be used to achieve special demands.it can also be adhered to rubber and metal with one side etched.
    Read More
  • Turning PTFE Teflon Plate

    Turning PTFE plate is commonly known as plastic King, F4, or Teflon. The suspension PTFE resin can be made into sheet metal, turning film and tube by molding. Can be pressed to push the molding. can be mixed with graphite, such as plate, rod, packing, rope, raw materials belt.
    Read More
  • Molded PTFE Plates

    Molded PTFE plate (also known as four fluorine plate, Teflon plate, Teflon plate) divided into two molding and turning, molded plate is PTFE resin at room temperature by molding method, and then sintering, cooling and made.Its products are widely used, with excellent...
    Read More
First Prev 1234567 Next Last 1/7
We're known as one of the most professional PTFE manufacturers and suppliers for our quality products and good service. Please rest assured to buy or wholesale bulk PTFE at cheap price here or contact our factory for quotation.
Subscribe to Our Special Offers

Please send us your requirement by email.

Copyright © Liaoning EO Technology Co.,Ltd All Rights Reserved.