Piston Rod Seal

The piston rod seal is installed inside the dust seal on the inner side of the end cap of the hydraulic cylinder. The function is to prevent leakage of hydraulic oil. One of the main pressure-bearing original parts is unidirectionally pressurized, and the pressure is large, and it is directly in contact with the hydraulic oil. It is required to have good pressure holding performance under static state, high pressure in motion, good sealing performance, small friction factor and strong anti-extrusion ability. The cross-section form and material of the piston rod seal are many, and different cross-section forms and materials are selected according to different working environments.
  • Low Friction Resistance Piston Rod Seal

    The piston rod seal is installed inside the dust seal on the inner side of the end cap of the hydraulic cylinder. The function is to prevent leakage of hydraulic oil. One of the main pressure-bearing original parts is unidirectionally pressurized, and the pressure is large,...
    Read More
  • Piston Rod Slide GSJ Seals for Shaft

    Piston rod sliding GSJ seals are used in hydraulic reciprocating systems. In high, medium, low pressure and heavy load, the sealing situation under high frequency conditions is very good. Suitable for a wide range of strokes and a wide range of fluids and high temperature...
    Read More
  • High Pressure Hydraulic Rod GSJ Seal

    High Pressure Hydraulic Rod GSJ Seal is the most critical seal on any type of fluid power equipment preventing leakage of fluid from within the cylinder to the outside. Leakage through the rod seal can reduce equipment performance, and also in extreme cases can cause...
    Read More
  • Hydraulic Cylinder Piston Rod GSJ Seal

    The hydraulic cylinder piston rod GSJ seal is installed inside the dust seal on the inner side of the hydraulic cylinder end cover. The function is to prevent the hydraulic oil from leaking out. One of the main pressure bearing parts is one-way pressure bearing, and the...
    Read More
  • Engine Cylinder Head Piston Rod Seal

    The engine cylinder head piston rod seal can guide the cylindrical metal mechanism in which the piston reciprocates linearly in the cylinder. Air converts thermal energy into mechanical energy by expansion in the engine cylinders; the gas is compressed by the piston in the...
    Read More
  • Hydraulic Cylinder Rod RDDR Seal

    The hydraulic cylinder seal is mounted on the hydraulic pump and the hydraulic motor shaft to prevent the working medium from leaking out of the housing along the shaft and the external dust to invade the inside of the body.
    Read More
  • Hydraulic Cylinder Rod IDI Seal

    The hydraulic cylinder rod IDI seal is mounted on the hydraulic pump and hydraulic motor shaft to prevent the working medium from leaking out of the housing along the shaft and the external dust is reversely invaded inside the body.
    Read More
  • NBR FKM Piston Seal

    The NBR FKM Piston Seal is mounted on the piston and serves to seal the gap between the piston and the cylinder to prevent leakage of hydraulic oil. The piston seal is the main seal in the hydraulic cylinder. It is one of the most important seals for the hydraulic cylinder to...
    Read More
  • Hydraulic Cylinder Piston Rod Seal

    The hydraulic cylinder piston rod seal is installed inside the dust seal on the inner side of the hydraulic cylinder end cover. The function is to prevent the hydraulic oil from leaking out. One of the main pressure bearing parts is one-way pressure bearing, and the pressure...
    Read More
  • PTFE Bronze Piston Rod Seal

    Piston GSI Seals consists of a PTFE Rod sealing ring and NBR/FKM O-ring, they are conbined as a single unit and are appropriate for rods and plugers in hydraulic cylinders. The rod GSJ seal is designed to ensure that pressurized fluid does not leak out of the system as the...
    Read More
  • Hydraulic Press UN Piston Rod Seal for Excavator

    Hydraulic machine UN piston rod seal is used for the excavator to be installed on the piston. The main function is to seal the gap between the piston and the cylinder to prevent leakage of hydraulic oil. The piston seal is the main seal in the hydraulic cylinder. It is one of...
    Read More
We're known as one of the most professional piston rod seal manufacturers and suppliers for our quality products and good service. Please rest assured to buy or wholesale bulk piston rod seal at cheap price here or contact our factory for quotation.
Subscribe to Our Special Offers

Please send us your requirement by email.

Copyright © Liaoning EO Technology Co.,Ltd All Rights Reserved.